Products
High-MFR PFA
  • High-MFR PFAHigh-MFR PFA

High-MFR PFA

For manufacturers sourcing fluoropolymer pellets for thin-wall precision components, Zhongwang's High-MFR PFA provides a melt flow rate of 16–45 g/10 min at 372°C/5 kg. This high-flow material is intended for small injection-molded fittings, intricate multi-cavity parts, fine-gauge wire insulation, and miniature fluid-handling components. Grade selection focuses on cavity filling, processing speed, wall thickness, and the mechanical demands of the finished part.

    When purchasing High-MFR PFA for miniature molded components, Zhongwang helps industrial buyers compare melt flow characteristics with their actual mold geometry and processing requirements. The material is a melt-processable perfluoroalkoxy fluoropolymer with a relatively low molecular weight compared with medium- and low-MFR grades.

    A higher melt flow rate makes it easier for molten resin to travel through narrow flow paths and fill thin sections before solidification. This characteristic is particularly useful for precision components containing small cavities, narrow channels, or complicated internal geometries.

    Higher flowability, however, involves a material trade-off. Compared with lower-MFR grades, high-flow PFA generally has reduced melt strength and may offer less resistance to long-term creep or environmental stress cracking.

    Consequently, this material is better suited to products requiring controlled filling and relatively thin sections than to thick-walled components exposed to substantial sustained pressure.

    Why Melt Flow Matters in Small-Part Manufacturing

    Filling Narrow Cavities

    In micro-injection molding, resin must pass through gates, runners, and thin sections before the melt temperature decreases. Insufficient flow may cause short shots, incomplete corners, or inconsistent filling between cavities.

    High-flow PFA can help address these challenges by reducing resistance to melt movement. The actual result depends on mold design, gate dimensions, melt temperature, injection pressure, and filling speed.

    Maintaining Thin-Wall Consistency

    Wire insulation and micro-tubing require consistent material distribution around narrow cross-sections. Resin flow behavior influences extrusion pressure, coating uniformity, and dimensional consistency.

    Suitable high-flow grades can be evaluated for fine-gauge insulation, small-diameter tubing, and other continuous extrusion applications where maintaining a thin polymer layer is important.

    Reducing Excessive Processing Pressure

    Compared with higher-viscosity PFA, a high-flow formulation may allow easier filling under otherwise comparable processing conditions.

    This does not eliminate the need for appropriate equipment. Fluoropolymer-compatible screws, barrels, tooling materials, and temperature controls remain necessary.

    Applications Where High Flow Is Useful

    Precision Injection-Molded Components

    High-MFR PFA is applicable to miniature valve inserts, small corrosion-resistant fittings, intricate instrument components, and non-pressure-bearing sample-cell housings.

    For multi-cavity tooling, manufacturers should evaluate cavity balance, weld-line formation, flash, and dimensional variation during trial production.

    Fine-Gauge Wire and Cable Insulation

    High-speed extrusion grades can be considered for thin insulation layers on specialized wires and small coaxial cables.

    The supplied reference identifies an MFR range of 16–30 g/10 min for this application category. Extrusion suitability also depends on die configuration, line speed, concentricity, and cooling conditions.

    Technical Specifications

    Item Reference Specification
    Product Name High-MFR PFA
    Brand Zhongwang
    Material Perfluoroalkoxy Fluoropolymer
    Melt Flow Rate 16–45 g/10 min (372°C/5 kg), grade-dependent
    Density 2.12–2.17 g/cm³
    Melting Point 300–310°C
    Tensile Strength ≥24 MPa, typical reference
    Elongation at Break ≥250%, typical reference
    Continuous Service Temperature -200°C to 260°C, application-dependent
    Dielectric Constant at 1 MHz 2.15, typical reference
    Flammability UL94 V-0 at 1.5 mm, grade-specific reference
    Appearance Translucent Ivory-White Pellets
    Processing Methods Injection Molding, Extrusion, Transfer Molding
    Packaging 25 kg PE Inner Bag and Paper Drum
    Available Documents TDS, COA, SDS and Applicable Test Reports

    Processing Considerations for Thin-Wall Components

    Temperature and Residence Time

    The supplied technical reference identifies barrel temperatures of approximately 335–375°C and die temperatures of 355–390°C. These are processing references rather than fixed settings for every machine.

    Extended exposure to excessive processing temperatures can degrade fluoropolymers and generate hazardous decomposition products. Equipment settings, residence time, ventilation, and shutdown procedures should follow the selected grade's processing and safety documentation.

    Flash and Weld-Line Control

    Improved fluidity may increase the likelihood of flash when injection pressure, mold fit, or gate design is unsuitable. Weld-line strength should also be evaluated where multiple melt fronts meet.

    Manufacturers should assess injection speed, pressure, cooling, and cavity geometry together instead of increasing material temperature as the only adjustment.

    Limits Under Sustained Mechanical Loading

    High-flow resin should not automatically be selected for thick-wall pressure fittings, tank linings, or diaphragms subject to significant long-term loading.

    In these applications, a lower-MFR material may be more appropriate because melt strength, creep behavior, and stress-crack resistance become more important than rapid cavity filling.

    Material Sourcing and Grade Selection

    Located in Yuyao China Plastics City, Zhejiang Zhongwang International Trade Co., Ltd. coordinates industrial resin procurement through established raw material sourcing and logistics channels.

    For considering High-MFR PFA, the most useful quotation details are the target MFR, processing method, minimum wall thickness, cavity configuration, operating medium, and expected mechanical loading.

    Where high-purity components are involved, metal-ion extractables and relevant technical documentation should be included in the purchasing requirements. Sample processing and finished-part testing are recommended before commercial approval.

    FAQ

    Why choose a high-flow PFA grade for thin-wall injection molding?

    Higher melt flow can help molten polymer fill narrow cavities and thin sections. Its suitability still depends on mold geometry, processing temperature, injection pressure, and the mechanical requirements of the finished part.

    Can this material be used for pressure-bearing fittings?

    It can be evaluated for appropriate fittings, but high-flow grades are generally less suitable for components dominated by long-term creep or substantial pressure loading. Pressure requirements and stress-crack resistance should be checked before material selection.

    What causes flash during PFA micro-injection molding?

    Flash may result from excessive injection pressure, unsuitable temperature, mold clearance, or poor gate and cavity design. A higher-flow material requires careful adjustment of these processing conditions.

    Is high-purity PFA required for semiconductor microfluidic parts?

    Applications involving sensitive process fluids may require specific limits for metal ions, extractables, and other impurities. The appropriate purity grade should be chosen against the actual fluid-contact requirements.

    Send Inquiry
    Contact Info
    • Address

      Building 1, China Plastics International Business Center, No. 285 Shunda West Road, Yuyao City, Ningbo City, Zhejiang Province, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept