Products

Products

View as  
 
Dispersion PTFE Resin

Dispersion PTFE Resin

Zhongwang, trusted Chinese supplier for bulk suppling Dispersion PTFE Resin for bulk purchasers producing paste-extruded tubing, thread-seal tape, cable insulation and selected expanded-PTFE materials. This dispersion-polymerized fine powder is chosen primarily for fibrillation and controlled paste-extrusion behavior. Buyers should specify the extrusion reduction ratio, lubricant practice, product dimensions and any post-stretching requirements before selecting a grade.
Suspension PTFE Resin

Suspension PTFE Resin

Zhongwang supplies Suspension PTFE Resin for wholesale procurement by PTFE rod, sheet, molded billet, gasket and corrosion-resistant component manufacturers. The granular powder is intended for cold compression molding or suitable isostatic pressing followed by sintering. Buyers can choose among fine-particle, general molding, free-flow granulated and high-cleanliness options according to mold filling, surface finish and production volume.
High-MFR PFA

High-MFR PFA

For manufacturers sourcing fluoropolymer pellets for thin-wall precision components, Zhongwang's High-MFR PFA provides a melt flow rate of 16–45 g/10 min at 372°C/5 kg. This high-flow material is intended for small injection-molded fittings, intricate multi-cavity parts, fine-gauge wire insulation, and miniature fluid-handling components. Grade selection focuses on cavity filling, processing speed, wall thickness, and the mechanical demands of the finished part.
Medium-MFR PFA

Medium-MFR PFA

Zhongwang, trusted Chinese supplier for bulk sourcing Medium-MFR PFA, supplies balanced-performance perfluoroalkoxy (PFA) fluoropolymer pellets (MFR 6-15 g/10 min, measured 372 ℃/5 kg, ASTM D1238) for global B2B fine-chemical, semiconductor fluid component, precision-injection-molding and wire-cable extrusion purchasers. Our Medium-MFR PFA strikes an optimal balance between melt-strength, stress-crack resistance and melt-flowability. It retains full PFA intrinsic merits: universal chemical inertness, continuous service temperature-200 ℃ ~ 260 ℃, outstanding dielectric performance, UL94 V-0 flame retardancy. Suitable for precision-injection fittings, thin-to-medium-wall tubing, wire-cable insulation, semiconductor-grade fluid parts and medium-thickness corrosion-resistant components.
Low-MFR PFA

Low-MFR PFA

Thick-wall fluoropolymer components place greater demands on melt strength and resistance to sustained deformation. Zhongwang assists manufacturers purchasing Low-MFR PFA for chemical equipment linings, heavy-wall fittings, pressure piping, valve components, and flexible corrosion-resistant assemblies. With a reference melt flow rate of 0.8–6 g/10 min, this high-molecular-weight material is selected where structural integrity and long-term loading are more important than rapid filling of extremely thin sections.
Flame-Retardant TPV

Flame-Retardant TPV

Electrical and cable-component manufacturers sourcing Flame-Retardant TPV through Zhongwang can select EPDM-PP thermoplastic vulcanizate grades according to their required flammability classification, wall thickness, flexibility, and processing method. Halogen-containing and halogen-free formulations are available for low-voltage cable jackets, connector coverings, electrical gaskets, and protective profiles. Reference grades cover Shore 55A–45D hardness, with UL94 V-2 or V-0 performance depending on the specific formulation and tested thickness.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept